Contact Us

Tel: 86-512-62861666

Fax: 86-512-62861666

Mob:+86 13218196967

E-mail:sales2@simya-tech.com

Audio Cable High Quality Sound Sep 30, 2017

Audio Cable is a very wide range of audio signal transmission. It is the use of phase cancellation principle of the audio signal transmission process to minimize the other interference. It needs to be tied to the three wires to achieve, that is, ground, hot, cold end.

Transmission lines of course have to be 2-core 1 shield line, because the hot side of the signal line and the cold side of the signal line in the same shield within the relative distance, so the transmission process by the other interference signal is almost the same.

The audio cable is used to connect the source device and the power amplifier. The quality of the market better sound line, the production of materials are mainly gold-plated, silver, oxygen and copper, non-metallic carbon to the higher import line, but the price is more expensive, the general need a few hundred dollars a , The main US MONSTER STANDRDINTERLINK (monster), AUDIO0UEST (line of St.), SUPRA (turtle), M0NITERPC (magic), SPACE & TIME (Macross), MISSION (sound), PATRDNICS (Bo force), VDH (Netherlands - )and many more. For the general popularity (million or less) of the audio equipment without deliberately seeking high-quality wire, as long as the use of a larger section of the copper core signal line can be larger. For good home theater audio equipment, you can consider the use of high-quality Audio Cables, such as in the DVD player and "AC-3" decoder has a fiber output, input interface, such as the use of optical fiber transmission line, Get a more obvious effect.

Audio Cable: a set of Audio Cables are often two, divided into two channels, the ends of the line are Lotus head (RCA head).

Coaxial line: used to transmit multi-channel signal (Dolby AC-3 or DTS signal), and Audio Cables similar to the large number of signals, connectors and lines are more than ordinary audio cable, generally used to connect DVD player and Amplifier.

Fiber optic cable: also used to transmit multi-channel signal (Dolby AC-3 or DTS signal), used to connect the DVD player and amplifier.

Microphone cable: A two-core coaxial cable for connecting the amplifier and microphone. At present, the rise of wireless microphones, if not for special consideration, wiring can not be considered, after the wireless microphone application will certainly be more and more widely.

Audio cable in the wiring when the basic need to consider, because the audio equipment and power amplifier often put together, these lines are very short, the latter configuration can be.